G.703 63E1/STM-1 over GE/ethernet converter/Multiplexer/ TDM over IP converter/ 2/4/16/63 E1 over IP converter

STM-1 TDM over IP equipment Ethernet to E1 1E1, 2E1, 4E1, 8E1 for option

Overview:

V-IPMUX-63 is E1 over Ethernet multiplexer product designed and made by VeeCOM. This converter E1 data encapsulated in the packet , support SAToP agreement and UDP/IP packet mode, that can be used to provide E1 communication channels over Ethernet or IP networks.

Features:

•provide 1 channel STM-1(63 E1 service) over 1 Ethernet adaptive

•Provide 5 GE electrical ports(two ports are uplink ports and the other three are local data ports,Anyone of 5 GE electrical ports may act as NM port), and 1 GE optical port ( used as either uplink port or local data port.)

•support SAToP protocol, Ethernet encapsulation support IP/UDP., support E1 Qos

•E1 clock supports 3 mode: local clock, adaptive and loopback

•Provide 2 STM-1 optical ports , Support 1 + 1 protection

•Ethernet built-in layer 2 switch, support VLAN802.1Q based and QinQ based), port based,8021.1P based and TOS based) Support port speed limited, flow control, MAC address automatic learning and MAC address aging time set;

•High transmission efficiency, low transmission delay

•Frequency reduction stability, low jitter and drifting

•Resist to packet loss, with frame synchronization protection,

•Enough jitter buffer to resist packet delay variation (PDV)

•User-friendly Web server supported for easy setup and maintenance

•Support SNMP network management (V2 version )

•Support Local and remote Software and hardware online upgrade

•Support SNTP network time setting

•Support software test E1 error

•support AC 100 ~ 260 V and DC-48 V dual power supply, realize 1 + 1 backup

Specification:

Capacity

2 STM-1 optical port (1+1 protection), 5GE electronically port , 1GE optical port and 1 external clock port

STM-1 port

Transmission rate: 155520kbit/s ±4.6ppm

Line code : scramble NRZ

Optical wavelength : standard 1310NM, optional /5:1550NM

Output average optical power: standard :≥–12 dBm,optional /L,/SL:≥-5dBm,optional /S:≥-14dBm

Optical receiving sensitivity : standard :-36dBm,optional /S:-30dBm

Connector : standard :SC ,optional :FC

Connector qty: 2

GE port

Comply with IEEE 802.3,802.1Q,802.1ad,802.1p recommendation

Working mode :GE: self-negotiation or forced 100M full/half duplex,10M full/half duplex

MTU:9720 byte

Connector :GE electrical port :RJ45, GE optical port: LC

Connector qty: GE electrical port : 5,GE optical port: 1

External clock port

Rate : 2048Kbit/s or 2MHz

Impedance: 75Ω or 120Ω

Connector :RJ-48C

Connector qty:1

Power

AC: 100V~260V/50Hz ~60Hz (fuse: 1A)

DC: -36V ~ -72V

Power Consumption::≤9W

Operating condition

Temperature: (0~45) °C

Humidity: ≤90%RH (non-condensing)

Dimensions

Width × Height × Depth (mm): 440× 44× 260

Net weight ≤3.5 kg

G.703 63E1/STM-1 over GE/ethernet converter/Multiplexer/ TDM over IP converter/ 2/4/16/63 E1 over IP converter